The Little Mark Tube solves the “tube or solid state” dilemma. The Little Mark Tube 800 goes a step further by also addressing that other perennial concern, “Will I have enough power?” The 800 watts from this powerful amp will satisfy any thirst for power, and the two blendable preamps give you the warmth and richness of a tube preamp, the clean attack of a solid state preamp… or a mix of both!
INPUTS
INPUT 1
impedance 500 Kohm, max. voltage 15 Vpp
INPUT 2 (Balanced XLR/1/4" combo)
balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
EFFECT RETURN
impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN 1
-60 dB to +23 dB range
GAIN 2
-60 dB to +23 dB range
MIX
mixes tube and solid state gain
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT
switch on rear panel
PRE/POST EQ
switch on rear panel
MUTE
push/pull on master knob
EQUALIZATION
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 20 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
SPEAKER OUT
speakon/1/4" combo, 1/4"
OTHER
WEIGHT
6.31 lbs / 2.86 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
500W RMS @ 8 ohm, 800W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)
NOTES:
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage.
Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
The Little Mark Tube 800 features a single 6205 miniature tube.
Product specifications are subject to change without notice